Product Detail
Pioneer C8 Stepless CREE XPL HI 1080 Lumen Flashlight
SKU: 16003
Beam color:


This light is one of the best C8 flashlights. HAIII anodization with stainless steel bezel, body is very strongly built.  As to the UI, it's exterme good UI for using this C8 as a bike light or rifle light. Highly recommended.


  • CREE XPL HI Emitter ; Cool white 6500K , Neutral white 5A 42000K

  • maximum output of 1090 lumens; Powered by single 18650 battery.

  • mode 3 plus stepless diming mode   (self-programing)

  • made by 6061 T6 Aluminum Alloy

  • Type HAIII anodization black

  • Tail cap clicking switch

  • Intergrated head to enhance the heatsinking ability

  • Stainless Steel bezel

  • Waterproof IPX8

  • Dimension: 150mm length x 45mm head diameter x 26mm body diameter

  • Netweight: 190 gram

    3 modes plus stepless brightness

  • Max brightness 100% 3A 1080 Lumens ;  3 groups -- Group 1 80% by default, Group 2 15% by default , Group 3 strobe by default.    (PS: Group 1 and group 2 support Stepless diming; Group 3-- 5modes ,super low>High>Strobe>Beacon>Flash>SOS)

  • Single click on ; Single click off

  • Operation for 3 groups (turn on flashlight first)

    A: Group 1-single mode; Half press once to Group 1

    B: Group 2-Single mode ; quick half press twice (Each press within 0.3s ) to Group 2

    C: Group 3 - 5 modes ; quick half press 3 times (Each press within 0.3S) to Group 3

  • Operation for Stepless brightness programing

    A:Turn on the light on Group 1 or Group 2 , await 1 second, quick half-press 5 times to enter stepless brightness mode

    a: Brightness increase every 0.5 second , it takes 10 seconds from 1% to 20% ; And it takes 8 seconds from 20% to 100%

    b: When the brightness is at max 100%, the light will flash once and stay 100% for 1 second, Then it will get down to 1% and recircle.

    B: Half press at any time when brightness circles, it will keep and memory the current brightness level.

  • Operation for Group 3 (5 regular modes)

    Enter group 3 by 3 quick half-clicks , await 1 second , then half-click 5 times, the light will flash 6 times slowly (1 second interval) .

    1. At first flash , half click the switch to select 1% low low mode

    2. At second flash, half click the switch to select 100% high mode

    3. At third flash , half click to select strobe mode

    4. ................... Beacon

    5. ................. Signal flash

    6..................  SOS

  • Low voltage protection

    The flashlight flashs once every 6 seconds to mind the battery voltage is below 3V.

Service Guarantee
Free shipping all products
1 year Quality assurance
7X15 hour customer service
Payment methods
Paypal Online ( Recommended)
Western Union (email consult)
Moneygram (email consult)
Bank Transfer (email consult)
My Profile
leave a message